- #Magic lantern canon brick update#
- #Magic lantern canon brick upgrade#
- #Magic lantern canon brick free#
In fact, you should be doing that anyway! I have ran into issues erasing photos on my computer so I have gotten into the habit of doing all formatting within the camera. You will now be able to shoot 7+ brackets without having to purchase a remote! Moving forward, only format your card in your camera (not from your computer). I adjust my shutter dial to underexpose an additional 2 stops, but that still wasn’t enough, so I had to move to 3 stops left of the 0 meter reading. I noticed that based off my scene, the bracketed shots were too overexposed, so my first underexposed shot of the set wasn’t dark enough. After hitting the play button to review the photos, you may need to re-shoot and adjust the exposure compensation simply by adjusting the shutter. Your camera should take all of the bracketed shots on its own after a 2-second delay!You may run into issues where the brackets don’t cover the correct span that you need because of the metering.
Adjust your shutter dial so the exposure shows 0 on your display, then press the shutter all the way down. With everything set, set your focus point and half-press the shutter. All other settings (ISO, White Balance, etc) are the same as what I would always shoot when doing interiors. I’ll be shooting in M (Manual) mode using Aperture 7.1 and Evaluative Metering, with a single shot selected for the drive function. Hit the Q button to back out to the main Magic Lantern menu, and then the Delete/Trash button to exit out of the menu all together. I am not comfortable/can’t figure out how Autodetect works for this setting. Press the SET button to turn it on, then press the Q button to go into the options for Advanced Bracketing.įrames: I selected 7 here, because when I blend with PhotoMatix I set it to blend 7 frames instead of having it auto detect which frames should be blended. Scroll to the right to the camera icon, the Shoot menu. Use the top dial to cycle through the Magic Lantern menu tabs. Magic Lantern will show you a splash screen – press any button to continue.
To get into the Magic Lantern menu on the 60D, you press the Delete/Trash button. Put the SD/CF Card back in your camera, and power on the camera. So shut your camera off before you go further, put your SD/CF Card in your computer, and copy ML/LOGS/ROM*.BIN to a safe location on your computer. If you noticed, Magic Lantern requested that you backup some important configuration files.
#Magic lantern canon brick free#
In my case with the 60D, I can see yellow text for the actual color temperature, how much battery percentage is left, and then a time which I presume is how much free video recording I have available on the card. When you fire up the camera for the first time after installation, you’ll already see some differences if you are looking at the LCD and are viewing all of the camera settings/info. Turn the camera off, then back on, just like the screen/Magic Lantern told you to do. After a couple of seconds, Magic Lantern will be installed!
#Magic lantern canon brick update#
For the 60D, you click the firmware version by pressing the SET button, and then pressing SET again to trigger the update process. Power on your camera and go to the menu and find the firmware version under settings. For my SD Card of my 60D, the root directory now looks like:
#Magic lantern canon brick upgrade#
Upgrade your firmware via Canon’s site if you have an older version installed.Īfter downloading the software zip file, extract it and copy the resulting files over to your SD/CF card. You can see what firmware version you have by going into your camera’s settings menu. For example, “60D.111” means 60D camera, with Canon Firmware v1.1.1 installed. The list shows the camera model followed by the firmware version that should be installed. You’ll select your camera from the drop-down. Make sure you have saved any photos that are on it before doing so! This way we’ll be starting from a clean slate.ĭownload a copy of Magic Lantern. Are you ready? Let’s do this.įormat your camera card inside your camera.
It gives you additional functionality (LOADS actually), most importantly, HDR bracketing customization. Say hello to Magic Lantern! It’s free software that can be added on to some Canon cameras, and runs off the SD/CF card. This method has been around for a long time – so there shouldn’t be any issues using it! However you are at your own risk following along with this guide, and I take no responsibility and unfortunately will not be offering support if you choose to move forward.